Structural featuresCots surface after conditioning, inner hole processing, do dynamic balance surface fine grinding and engraved with pit type reticulation, evenly coated, less glue consumption. The surface of the squeezer roller is ground and plated with hard chrome. The rest of the paper guide roller surface plated with hard chromium. Pressure roller pneumatic lift, easy to operate. Manually adjust the clearance of paint scraping. Apply cots of 215mm, uniform cots of 122mm, pressure roll of 122mm, preheating roll of 270mm. Electrical design, production and construction process, in accordance with national standards and specifications, low failure rate, simple maintenance.Technical parameters

Work width	1400-2500mm
Paper clip range	maximum1800mm- minimum800mm
Folder diameter	maximum1500mm -minimum350mm
Main shaft diameter of paper holder	￠240mm
Gas source work pressure	Mpa0.4---0.8Mpa
Operation direction	left set or right set (according to the customer plant)
Design speed	100-300 /min
Air source system	0.4-0.9mpa
Preheating cylinder temperature range	150-200 ℃
Steam pressure	1.12 -- 1.3mpa

Roller diameter parametersDiameter of cots￠215mm diameter of cots Fixed paste roller diameter￠122mm diameter of fixed paste roller Lower preheating roller diameter: ￠320mm Upper preheating roller diameter￠270mm diameter of preheating roller Diameter of paper roll: ￠85mmPower motor parametersCots active motor: 3KW Glue quantity adjustment reducer: 250W Pressure roller clearance adjustment motor: 250W Rubber pump motor: 2.2KWHydraulic system parametersWork pressure（Mpa）:16---18Mpa Lifting hydraulic cylinder：￠100×440mm Clamping hydraulic cylinder：￠63×1300m Hydraulic station motor power：3KW --380V -- 50Hz Solenoid valve voltage：220V 50 Hz